Custom Log Hoop Firewood Rack Cover

To ensure your Custom Log Hoop Firewood Rack Cover fits perfectly around your circular rack's unique geometry, take the following four measurements:

1. Slant Height

Measure from the bottom of the tubular base support (where it touches the ground) up along the slanted hoop frame to the very top of the circular hoop. Follow the angled curve of the hoop—this is not a straight vertical measurement, but rather the slanted distance from ground to peak.

2. Diameter

Measure straight across the widest point of the circular hoop from one side to the opposite side, passing through the center. This is the width of your log hoop at its maximum span.

3. Middle Depth

Measure the depth from front to back at the middle section of the hoop—approximately halfway up the slanted frame. This captures how far the circular wood pile extends at its widest middle section.

4. Lower Depth

Measure the depth from front to back at the base where the tubular supports are positioned. This measurement is typically smaller than Middle Depth due to the slanted design of hoop racks.

Measurement Guidelines:

• Measure with the rack loaded to typical capacity
• Follow the slanted curve for Slant Height—not straight vertical
• For Diameter, measure across the full circular opening
• Round up to the nearest inch for a comfortable fit

Ideal For:

• Circular log hoop racks with tubular steel bases
• Round firewood holders with slanted hoop designs
• Compact patio and deck log hoop storage
• Contemporary curved firewood rack designs
• Space-efficient circular wood storage systems
• Homeowners with decorative hoop-style racks

Each Custom Log Hoop Firewood Rack Cover is constructed from 18 oz PVC-coated polyester, engineered to conform to the circular geometry and slanted profile of hoop-style racks. The waterproof PVC coating shields wood from moisture while protecting tubular steel frames from rust. UV stabilization prevents fabric breakdown from sun exposure. Air vents allow proper circulation throughout the circular wood stack, preventing condensation buildup. The fabric's flexibility allows it to drape naturally over the curved hoop structure while maintaining structural integrity at stress points where the cover bends around the metal frame.

The Custom Log Hoop Firewood Rack Cover provides complete weather protection for circular hoop-style firewood racks with slanted designs and tubular base supports. Our custom-designed cover envelopes the entire circular structure, conforming to the unique slanted geometry from the lower tubular base through the curved hoop frame to the top. The four-measurement system captures the slanted height, circular diameter, and varying depth at different levels, creating a cover that fits the round architecture without bunching at curves or leaving gaps around the angled frame. This cover shields your entire wood supply and metal frame from rain, snow, and UV damage while maintaining ventilation for proper wood drying.

Why Choose Custom Log Hoop Firewood Rack Covers?

• 18 oz Industrial-Grade Fabric: Superior durability handles the stress points created by curved metal frames and circular geometry that damage lighter covers.
• Circular Geometry Engineering: Four-measurement system captures the slanted profile and varying depths—creating a proper fit for round hoop architecture that standard rectangular covers cannot accommodate.
• Slant Height Precision: Follows the angled curve of hoop racks from ground to peak, ensuring complete coverage along the slanted frame without excess fabric pooling at the base.
• Frame and Wood Protection: Covers both the circular wood pile and tubular steel base supports—preventing wood moisture damage and metal rust simultaneously.
• Long-Term Value: Backed by a 10-year performance warranty, protecting your hoop rack investment season after season.