Custom Firewood Rack Covers

Racks with arched tops need four specific measurements to ensure your cover fits the curved top profile perfectly. Here's what to measure:

1. Height
Measure from the ground (or bottom of the rack base) straight up to the highest point of the arch. This is the peak of the curved top frame—the tallest point of your entire rack structure.

2. Height to Edge
Measure from the ground straight up to where the arched top frame meets the side posts—basically, where the curve starts. This tells us where the arch begins and helps us pattern the cover's curved section correctly.

3. Top Width
Measure the width across the top of the rack from one side to the other at the base of the arch (where you measured Height to Edge). This is the inside width between the two side frames where your wood sits.

4. Depth
Measure from the front edge of the rack to the back edge. This captures the front-to-back dimension and tells us how deep the cover needs to be.

Ideal For:

• Arched firewood racks with curved top frames
• Log racks with peaked or vaulted tops
• Decorative racks with architectural arch designs
• Covered firewood storage with curved canopies
• Contemporary arched wood holders for outdoor spaces
• Homeowners with premium arched-style firewood racks

Each Custom Arched Firewood Rack Cover is constructed from 18 oz PVC-coated polyester, engineered to conform to curved top frames. The waterproof PVC coating keeps rain, snow, and ice off your wood while protecting the metal frame from rust and corrosion. UV stabilization prevents fabric breakdown from constant sun exposure.

The Custom Firewood Rack Cover provides complete weather protection for firewood racks with curved or peaked top frames. Our cover is specifically patterned to accommodate the arched architecture, conforming precisely to the curve from side to side and top to bottom.

The four-measurement system captures your rack's peak height, where the arch begins, the width at the base of the arch, and the front-to-back depth. This creates a cover that fits your arched frame perfectly—the fabric follows the curve smoothly without pulling tight at the peak or sagging between the sides.

This cover shields your entire wood supply and frame from rain, snow, ice, and UV damage. The arched design naturally sheds water and snow, while built-in ventilation keeps air circulating so your wood can continue to dry and season properly even while protected.

Why Choose Custom Firewood Rack Covers?

• 18 oz Industrial-Grade Fabric: Built to withstand the unique stress points created by arched frames and curved tops that cause lighter covers to tear or fail.
• Arched Geometry Engineering: Our four-measurement system captures both the peak height and where the curve begins—creating a proper fit for arched architecture that standard flat-top covers cannot accommodate.
• Curve-Following Design: Flexible fabric drapes smoothly over the arch from side to side without the pulling, sagging, or fabric stress that occurs when using flat covers on curved frames.
• Complete Arched Coverage: Protects the entire structure from the ground up and over the arch, following the curve precisely with no gaps at the peak or exposed sections along the sides.
• Long-Term Value: Backed by a 10-year performance warranty, protecting your investment through countless seasons of use.