Custom Adirondack High Chair Cover

Ordering your custom high chair cover requires eight measurements that capture the elevated seating position and attached legrest.

Measure theback height from the ground to the top edge of the backrest. Record thedepth from the back of the chair to the front edge of the seat. Measure thedepth of arm from the front edge of the armrest to where it meets the backrest.

Capture theheight from ground to arm from the floor to the top of the armrest. Measure thearm-to-arm width at the widest point between the outer edges of both armrests. Record thelegrest depth from where it connects to the chair to its furthest extension point.

Measure theheight from ground to legrest at the point where the legrest attaches to the chair frame. Finally, measure theback width across the backrest at its widest section.

Use Cases:

• Wooden high chairs vulnerable to sun damage on elevated surfaces
• Poolside and waterfront high chairs with legrests facing moisture exposure
• Bar-height deck seating exposed to year-round weather
• Outdoor kitchen and entertainment area high chairs
• Resort and hospitality elevated seating requiring durable protection
• Winter storage protection for high-value custom high chairs
• Vacation property furniture during unoccupied periods

Our high chair covers use 18 oz PVC-coated polyester engineered to accommodate the elevated frame and extended legrest. The water-repellent coating blocks rain while remaining flexible in cold temperatures, and UV inhibitors prevent sun damage across the increased surface area.

Built-in ventilation eliminates humidity buildup that causes wood rot and mildew. Reinforced stitching prevents tears at stress points, while the drawstring closure with cordlock maintains secure tension during storms.

Integrated handles at natural lifting points allow easy removal. The design accommodates the high chair's elevated profile and legrest extension, preventing wind from getting underneath the cover.

Adirondack high chairs elevate the classic design to bar or counter height while adding an integrated legrest for extended comfort. The elevated position exposes more wood surface to direct sun and wind, while the legrest creates an additional protection challenge that standard chair covers don't address. A custom cover captures the high chair's specific proportions—the increased back height, elevated seat position, legrest dimensions, and attachment points where generic covers leave gaps. 

Why Choose Our Adirondack High Chair Covers?

• Custom measurements capture the elevated seating position and integrated legrest. Eight precise measurements account for the increased back height, elevated arm position, and legrest dimensions that differ from standard Adirondack chairs. The high chair's profile creates different protection requirements—more exposed surface area means greater UV damage risk, while the legrest adds complexity that generic covers can't accommodate. 
• Weather-resistant fabric protects wood from moisture and UV damage that causes deterioration. The elevated position exposes more wood to direct sun throughout the day, while the legrest creates horizontal surfaces that collect water. The PVC coating creates an impermeable barrier against water penetration while UV inhibitors block the rays that dry out wood fibers and fade finishes. 
• Ventilation system prevents trapped humidity that damages wood and accelerates rot. High chairs have more vertical space where moisture accumulates, particularly around the legrest connection. Strategic air vents release humidity that would otherwise condense inside the cover, creating conditions where mildew grows and wood rots. This airflow works even when tightly secured, protecting during extended covered periods without creating moisture problems.
• Engineered construction with reinforced stitching ensures protection through years of use. Reinforced stitching prevents the seam failure that typically occurs after repeated covering cycles. The cover keeps your investment protected for years to come.